Open the app and select Connect to Hub . The app will start looking for an available Hub. Make sure your mobile device and the PowerView® Hub are connected to the same home network. When your Hub has been discovered, select Set Up to start configuring the Hub.
How do I reset my Hunter Douglas PowerView hub?
Locate the Reset button on the back of the Hub. Press and hold the Reset button for 6 seconds. Keep pressing until the LED turns off. The Hub will reboot .
How do I set up PowerView app?
Connect Phone to Wifi. Then connect phone to HUB (on SAME Wifi network). Follow app screen instructions. Discover Hub….
- Initial Hub Setup, either Wired method (preferred method)
- OR Wireless method.
- Discover Shades.
- 1/ Tap Menu of How to setup Hub Wifi via App wirelessly.
What is PowerView hub?
The PowerView Hub connects to a Wi-Fi router, and communicates with Hunter Douglas window coverings that feature PowerView Automation. It stores user-defined data, such as Scene and Automation information, and provides control of window coverings from anywhere in the world using the RemoteConnect™ feature.
What is a Power View Hub?
The PowerView™ Hub interfaces with the PowerView App to allow control of LUXAFLEX® motorised window coverings from mobile devices. The Hub can also integrate with home automation systems via IP or an RS-232 serial connection.
How do I reset my PowerView shade?
Basically, it boils down to doing a manual reset.
- Press and hold the manual button on the headrail gently for 6-10 seconds. When the shade jogs, immediately release the button. I suggest turning off all noise in the room.
- Watch the shade go completely up and down while it sets new limits.
- Repeat as necessary.
How much is a PowerView hub?
You can also control them via voice commands (Amazon Alexa, Apple Siri, and Google Assistant), but you’ll need the company’s $285 PowerView hub to do so.
How do I connect my Powerview hub to my router?
Connect the Ethernet cable from the Hub to an open LAN port on your router The Hub will install a firmware update and reboot The Hub will blink AMBER when it is ready to join a PowerView Shade Network Note: If connecting the Hub to the home network via Ethernet, connect the Hub to the router, before connecting the Hub to power
What does a Powerview hub do for Hunter Douglas?
The PowerView Hub enables use of the PowerView App. The PowerView Hub connects to a Wi-Fi router, and communicates with Hunter Douglas window coverings that feature PowerView Automation.
Do you need remoteconnect to use Powerview?
Yes, adjust your window coverings featuring PowerView Automation to preset scenes when you’re away via the RemoteConnect™ feature. RemoteConnect must be enabled in your PowerView Hub and accessed from a PowerView Account. Additionally, your PowerView Hub must be connected to your home’s internet network. What is a scene?
What kind of data does Powerview Hub store?
It stores user-defined data, such as Scene and Automation information, and provides control of window coverings from anywhere in the world using the RemoteConnect™ feature. Get more answers to PowerView Automation questions.
