Step 2: Program the HEAT Setting

  1. Slide the SYSTEM SWITCH button to the HEAT setting.
  2. Press PROGRAM.
  3. Use the UP/DOWN arrow keys to select the hour you want the first program to begin.
  4. Press the PROGRAM key again.
  5. Use the UP/DOWN arrow keys to set the minute you want the first program to begin.
  6. Press PROGRAM again.

How do I reset my hunter thermostat 44155c?

Press and hold the Programs button, and at the same time press in the recessed Reset button with the tip of a ball point pen. Release the Reset button and continue holding the Programs button until the Reset Memory screen appears (then release the Programs button).

How do you program a hunter 44550 thermostat?

Operating Instructions for an Energy Star 44550

  1. Set the time by pressing and holding the “Hour” button until the current hour appears.
  2. Press “Auto Program” to use the pre-set program for the thermostat.
  3. Slide the “System Selector” switch to either “Heat” or “Cool” to make changes to the current program.

How do I reset my Hunter programmable thermostat?

You can reset them all at the same time using the reset button.

  1. Open the faceplate on the Hunter thermostat.
  2. Twist a paper clip so one of the ends is sticking out.
  3. Press the end of the paper clip into the “Reset” pinhole and hold it for two seconds to clear the programming.

How do you shut off Hunter Indiglo thermostat?

Once programs for all days have been set, press the HOME/DONE button to exit the programming mode. You have now programmed your Hunter Indiglo thermostat. Press the SCHEDULE button. Use the + and – keys to toggle to OFF. Touch the SCHEDULE button again.

How do I schedule program on my Indiglo thermostat?

When the correct time and date display, press the HOME/DONE button to lock in the time and date. Press the SCHEDULE button to enter scheduling mode. Press the + or – key until the display reads ON, indicating the scheduling mode is activated. MONDAY will be flashing on the screen. Press NEXT to begin scheduling the program for that day.

How do I Change my Hunter thermostat to C°?

In order to change to C° mode, slide the switch to C° and press the reset button on front of the thermostat with a paper clip. PROGRAMMING Setting Time and Day Remove the mylar label covering the LCD display window before operating thermostat. Initial display after power-up or reset.

What are the temperature settings on the Hunter 44550?

Auto Programming. When batteries are first installed, the thermostat has all 4 programs set for 68°F (20°C) in Heat mode and 78°F (26°C) in Cool mode. NOTE: There are no energy saving time or temperature settings until the thermostat is Auto Programmed or Manually Programmed.