2018-2020 Hyundai Santa Fe Service Required message Reset
- Turn the engine On.
- Press the MODE button to navigate USER SETTINGS.
- Then scroll down to SERVICE INTERVAL then press OK.
- Enable the SERVICE INTERVAL then scroll down to RESET then press OK.
- Then select YES then press OK to confirm the reset.
How do you reset the oil light on a 2011 Hyundai Santa Fe?
How do you reset the oil life on a 2011 Hyundai Santa Fe? Press the MODE button (rectangle icons) on the bottom right of the steering wheel to highlight the INFORMATION menu. Press the SELECT/RESET button to access the menu and use the DOWN arrow to turn the SERVICE INTERVAL mode on and set the applicable interval.
How do you reset the oil life on a 2010 Hyundai Santa Fe?
You will have to reset this message by pressing the SELECT/RESET option which is situated under the right side of the steering wheel. Do this for 1 second until the service interval is changed to the default settings it came with.
How do you reset the oil light on a Hyundai?
You can clear or reset this oil change light using the following steps.
- Start the vehicle.
- Press and hold the “OK” or “RESET” button (varies by model) for 5 seconds.
- Release the “OK” button, then press and hold it again for 1 second. The oil change light will then reset.
Where is the TPMS reset button Hyundai Santa Fe?
You’ll usually find the tire pressure monitor reset button beneath the steering wheel. Drive the car at 50 mph for about 10 minutes. Without starting the car, turn the key to the “On” position. Press the TPMS reset button and hold it until the light blinks three times, then release it.
How do you reset the oil life on a 2011 Hyundai Sonata?
You’ll first need to put the key in the ignition and give the vehicle power. Now located the OK button on Your steering wheel and hold it down for a few seconds. After a few moments the light will disappear and You should get confirmation on Your instrument panel that it has been reset.
How do you reset the oil life on a 2007 Hyundai Santa Fe?
When You get to Your service warning hold down the arrow button for one moment. You will see a light flash for a moment. Once this light has flashed You can now let go of the button and Your oil life should be reset.
How to reset the oil change light on 2010 Hyundai Santa Fe?
Go under the hood and add oil. Turn on the engine and check the oil pressure gauge to make sure it rises. Let your Santa Fe run for a minute. Lower your Hyundai Santa Fe and turn off the engine. Take an oil reading on the dipstick. If the oil level isn’t at full, add a bit more oil. Thanks Kinldy rate the answer Smith Posted on
How do I reset the service interval on my Hyundai Santa Fe?
To reset this message, press the SELECT/RESET button (left pointing arrow) on the bottom right of the steering wheel for more than 1 second. The service interval will be reset to the default setting. *The service interval feature has to be turned on and set by the user by accessing the SERVICE INTERVAL menu.
Where is the oil filter on a Hyundai Santa Fe?
Locate the oil filter and oil drain plug underneath the car. The drain plug is on the bottom of the oil pan, and the filter is to the side of the oil pan. Remove the oil drain plug using the 17mm wrench. Pull the plug out quickly and let the oil drain for 10 to 15 minutes. Check the gaskets and threads for damage.
How to reset service light oil life indicator?
Press the SELECT/RESET button to access the menu and use the DOWN arrow to turn the SERVICE INTERVAL mode on and set the applicable interval. Turn the ignition off and then start the engine to verify the indicator has been reset.
