The standard delay is 4-1/2 minutes but this can be adjusted using a Multi-Function door control, if one is installed. If your light consistently stays on, the reason may be as simple as the light button on your Multi-Function door control being accidentally pressed.
Why does garage door opener light stay on?
The opener’s light may be staying on because the light feature has been activated. The light feature was designed to turn on automatically so you never have to enter a dark garage. This feature is triggered when you interrupt the signal between the photo eye sensors when entering or exiting the open garage door.
How long does garage door light stay on?
Is your garage door opener light coming on and staying on? It’s usual for it to be on for about 4 minutes after you open your door. However, if it is staying on longer than that, there is a problem you need to address.
How do I keep my Chamberlain garage light on?
Change the Light Timing Using A Smart Control Panel
- Locate your navigation button below MENU to view the Features menu.
- Use the navigation buttons to scroll to LIGHT SETTINGS.
- Set the duration for garage door opener light to stay on after operation.
How do you turn off automatic garage lights?
You can turn it off from your control panel by selecting “Menu” > “Light Settings” > “Automatic Light” > “Motion Sensor,” which will disable the feature. Sometimes, the door’s wiring is the problem. First, reset your light timer to its lowest setting. Disconnect the power from the unit, and the wiring from the opener.
How do I set the light timer on my garage door opener?
Light Timer
- Press and hold the Lock button until the light blinks (about 10 seconds).
- A single blink indicates that the timer is reset to 1-1/2 minutes.
- Repeat the procedure and the light will blink twice, resetting the timer to 2-1/2 minutes.
How can I keep my garage light on?
Change the Light Timing Using A Smart Control Panel Locate your navigation button below MENU to view the Features menu. Use the navigation buttons to scroll to LIGHT SETTINGS. Set the duration for garage door opener light to stay on after operation. Select a range of 1-1/2 to 4-1/2 minutes.
How do you change the time on a garage door opener?
One dial controls the time and travel distance of the door. The other controls the light. Insert the blade of the screwdriver into the appropriate slot. A clockwise turn will increase the time the light stays on, while a counter-clockwise turn will decrease the time. The range on most light units is from 90 to 240 seconds.
How do you turn off the garage door opener light?
Start with the garage door opener lights “OFF”. Press and hold the light button for 10 seconds. (Upon pressing the light button, the lights will immediately turn on and go off 10 seconds later.) Press the Light button to turn the opener light on or off.
How to troubleshoot a Chamberlain garage door opener?
From informational videos to product manuals and troubleshooting articles, the Chamberlain Group resource library has the information you need. To interact with this component, access the Preview mode. You need to enable security on this component, as it could expose confidential information (see Allowing User Impersonation ).
How do I Turn on my door opener?
With the door closed, press and hold the small remote button that you want to control the light. Press and hold the Light button on the Multi-Function door control. While holding the Light button, press and hold the Lock button on the door control. After the opener lights flash, release all buttons. Was this helpful?
